DMC Projected Capacitive Touch Screens
Here you find the EXC-Series datasheet.
The DMC EXC72xx-series touch controller and the appropriate cables connect the touch screens with the PC interfaces RS232 or USB. At the bottom of this page you can find the available firmware versions for these controllers.
Please click here for the corresponding drivers.
| Size | Glass Thickness | Type | Notice |
|---|---|---|---|
| 5,7″ | |||
| 14,48cm (5,7″) | 2.35mm, standard glass | ||
| 6,5″ | |||
| 16,51cm (6,5″) | 2.35mm, standard glass | ||
| 7″ | |||
| 17,78cm (7″) | 2.35mm, standard glass | ||
| 8,4″ | |||
| 21,34cm (8,4″) | 2.35mm, standard glass | ||
| 9″ | |||
| 22,86cm (9″) | 2.35mm, standard glass | ||
| 10,4″ | |||
| 26,42cm (10,4″) | 2.35mm, standard glass | ||
| 12,1″ | |||
| 30,73cm (12,1″) | 2.35mm, standard glass | ||
| 15,1″ | |||
| 38,35cm (15,1″) | 2.35mm, standard glass | ||
| 17″ | |||
| 43,18cm (17″) | 2.35mm, standard glass | ||
| 19″ | |||
| 48,26cm (19″) | 2.35mm, standard glass | ||
| 22″ | |||
| 55,88cm (22″) | 2.35mm, standard glass |
Controller Firmware for DMC projected capacitive touch screens
For the DMC projected capacitive touch screens a controller firmware is required. Please choose the the correct firmware from the following list. The firmware name consists of the following:
1. Touchscreen type e.g. EXC-057B060A
2. Firmware type e.g. EXC7236-0001
3. Cover glas e.g. none for no cover glas or e.g. 1.1mm for glas thickness
4. Multi touch e.g 2 for dual touch
